How To Use PawLab Eco Carpet Cleaner Shampoo
Deep-clean and disinfect carpets, rugs and suitable upholstery with PawLab’s WoolSafe Certified Carpet Cleaner Shampoo.
- Prepare the area: Vacuum thoroughly to remove loose dirt, dust and pet hair. Test on a small, hidden area before use.
- Prepare your machine: Add shampoo and water using the instructions below for your machine type.
- Clean & disinfect: Move the machine slowly across the surface. Avoid oversaturating the carpet.
- Extract excess moisture: Use suction-only passes to remove excess water, if your machine supports them.
- Allow to dry: Leave the carpet to air dry naturally after cleaning.
Machines That Mix Shampoo & Water in the Same Tank
Use 10ml shampoo for a 500ml tank, 15ml for a 750ml tank, or 20ml for a 1L tank. Fill with clean, warm water first, then add the shampoo.
Machines With Automatic Detergent Dosing
Add undiluted shampoo to the detergent compartment and clean water to the water tank. The machine mixes them as you clean.
Coverage Guide
Allow approximately 10ml of shampoo per m² for light cleaning, or 15ml per m² for heavily soiled or high-traffic areas.
For Stubborn Pet Urine Stains & Odours
Pre-treat affected areas with PawLab’s Enzyme Urine Stain & Odour Remover. Allow 5–10 minutes for the enzymes to work, blot excess liquid and let the area dry completely before shampooing. Get the enzyme remover and carpet shampoo together in our Pet Urine Carpet Cleaner Bundle.